Luxembourg
Description
Winter Sottozero Serie II
Improved lateral grip and reduced noise level
Reduced aquaplaning risks and increased tyre stiffness
Excellent handling and grip in dry and wet conditions
Improved contact area even on slippery road surfaces
The ideal choice for sports cars and top end vehicles, balancing performance, safety and respect for the environment. The asymmetric tread pattern is divided into two distinct elements. The inner area expels water effectively whilst the external area, with its more rigid and spaced blocks, ensures high levels of grip on snow.
Asymmetrical tread pattern: internal area
Advantages: Snow traction and riding comfort.
Patented I.B.S. technology for sipe construction
Advantages: Improved grip for traction and braking performance. Stability for improved handling.
New Temperature Dynamic Compound (TDC)
Advantages: Safety and enjoyment when driving in autumn and winter weather conditions.
Asymmetrical tread pattern: external area
Advantages: Safety on wet surfaces and enhanced handling in the dry.
Run Flat™ – PIRELLI Self Supporting tyres
Run-flat tyres mean safety. They enable better control of the vehicle in an emergency so that you can continue driving safely even in the event of a rapid loss of pressure. Up to 80 kilometres of driving distance, with a maximum speed of 80 km/h. Only possible with a functioning air pressure control system.
Essential advantage of this tyre for you:
Precise directional stability even at high speeds
Excellent steering precision
Enormous vehicle stability in all conceivable situations
Increased driving comfort and safety thanks to even wear and tear
Premature replacement of a tyre reduced to a minimum
Source of technical illustrations: Pirelli Deutschland GmbH
Manufacturer information
EU Tyre Label
As of 01/11/2021, the European Tyre Labelling Regulation EU/1222/2009, (EU tyre label) applies. This regulation applies for all newly manufactured tyres as of CW27/2021.
The EU tyre label provides information about the criteria for fuel efficiency, wet grip and external rolling noise and is binding for all car, LGV and HGV tyres (classes C1, c2 and C3) within EU Member States.
The aim of the EU tyre label is to increase safety, environmental protection and efficiency of road traffic by promoting fuel-saving, safe and quiet tyres.
Alongside the EU tyre label, you should continue to consider the relevant tyre tests as an important factor in your decision to purchase, as the new EU tyre label tests only three important criteria. in this way, for example, the driving characteristic of summer tyres on a dry road is assessed just as little as the snow grip of winter tyres
C
Fuel efficiency
Fuel consumption is dependent upon the rolling resistance of the tyres, the vehicle itself, driving conditions and driving style. The measured rolling resistance (rolling resistance coefficient) of the tyre is categorised in classes A to E. (with the old label up to calss G)
Fitting a vehicle with class A tyres all round can lead to a reduction in fuel consumption of up to 7.5%* in comparison to the same vehicle with class E tyres all round. Commercial vehicles may have even greater reductions.
(Source: Impact analysis of the European Commission
* if measured in accordance with the stated procedures in EU Regulation 2020/7400)
Wet grip
For wet grip, the so-called wet grip coefficient is calculated from the braking distance or maximum friction value between tyre and road surface in comparison to a reference tyre, and categorised in the classes "A" (shortest braking distance) to "E" (longest braking distance). (with the old label up to class G)
Please note that road safety is highly dependent upon individual driving style. Stopping distances must always be observed. To improve road grip in wet conditions, tyre pressure must be checked regularly.
External rolling noise
The external rolling noise value is specified in decibels. In addition, a classification of A, B or C is assigned, whereby "A" represents the quietest and "C" represents the loudest rolling noise. (With the old label, with classes 1, 2 and 3, "1" represents the quietest and "3" the loudest rolling noise.
The noise emission of a tyre has an effect upon the total noise of the vehicle and influences not only driving comfort, but also environmental noise pollution.
